Plan a MobileCM installation from the antenna back to the receiver. Find a rigid open-sky position, measure the cable route and locate sheltered power and a reliable internet connection. Check local station eligibility before making permanent changes to the building.
Choose the site before opening the kit
Walk the cable route from the proposed antenna position to a dry location for the receiver. Include bends and the run inside the building. A bracket high on a roof may have a worse sky view than a lower position clear of the chimney. Take photographs in several directions from a safely accessible position. Use the site assessment to compare locations and the cable guide to check the measured route. Ask a qualified installer to assess any roof work and protection the building requires.
Connect the two antennas
With power disconnected, identify the labels on the receiver. On the MobileCM installation shown in the manufacturer’s instructions, the small Wi-Fi antenna goes on WiFi-BT. The GNSS antenna cable goes to GNSS+, with the TNC end at the outdoor antenna. Leave UWB unused. If the labels on your unit differ, look up its model-specific manual before connecting power. Keep the receiver and its power supply indoors.
Commission it while someone can see the receiver
Connect the specified USB-C power supply. Use a phone or laptop to join the receiver’s setup network. A warning that this temporary network has no internet is expected. Open the local setup page, select the host’s 2.4 GHz network and complete the miner-key step. The MobileCM configuration walkthrough gives the address and explains how access changes once the receiver joins your router.
Record what is working
Check the power, internet and satellite indicators separately. Open the GEODNET Console guide, match the station identifier to the receiver and look for recent observations. Note the commissioning time, take a photo of the finished mount and save the cable length and equipment model. These records give you a starting point if the station drops offline or a building project changes the sky view. If only one indicator looks wrong, follow the signal-loss checks before changing the installation.