Configuring a GEODNET MobileCM base station

Configuring a GEODNET MobileCM base station

Use the HYFIX guide for the exact receiver on your desk. Base station configuration covers the antenna connection, power, internet and registration in the GEODNET Console. RTKsub’s rover-side server settings do not belong in this setup.

Join the receiver’s setup network

On your phone or laptop, look for the receiver’s temporary Wi-Fi network. The GEODNET internet guide lists names beginning with MobileCM_ or MGW200_. Use the receiver serial number as directed in that guide. Stay on this network if the phone reports that it has no internet. Open http://192.168.4.1 in a browser while still connected to the receiver.

Move the receiver onto the building Wi-Fi

Select the host’s 2.4 GHz network and enter its Wi-Fi password. Complete the miner-key field as directed and store the key privately. A 5 GHz-only network will not appear as a usable option. When the receiver switches networks, the local setup page may disappear from your phone. Rejoin the building Wi-Fi before checking its status.

Find it again and verify registration

After setup, the home router assigns the receiver an address. Look for the connected client identified as espressif and use its assigned address for local access. The initial setup address belonged to the temporary network. Match the unit to its entry in the GEODNET Console. If the green light keeps blinking, use the indicator guide to identify whether it is trying to join Wi-Fi or already connected without internet.