A roof antenna on a tractor is not enough to establish RTK compatibility. Identify the receiver, guidance display, any required accuracy unlock and the internet path used by the NTRIP client. These can be separate components from different manufacturers.
Check the menus before paying
Look for a custom NTRIP connection, server, port, mountpoint and login. Check with the supplier that the receiver accepts the correction format and the display can send GGA. A menu restricted to a manufacturer’s own correction account may need an approved alternative configuration.
Test a real field task
In open sky, confirm fresh corrections and a fixed position. Drive a short guidance line and return to it. For repeat work, store the line with its coordinate reference and verify it again after restarting. A correction subscription does not activate steering or a locked receiver feature.
Identify the component that logs in
On some installations the display runs the NTRIP client. On others it is a separate modem or controller feeding corrections to the receiver. Photograph the labels on the display and receiver and locate the page that accepts a custom caster. Check with the installer which unit sends GGA and whether an accuracy unlock is needed. Have the RTKsub agriculture instructions available at the tractor.
Make a repeatable pass
Choose an open part of a field with reliable mobile reception. Save an AB line, note the selected implement and offset, then drive it in both directions. After a restart, reload the same line and compare wheel tracks at the same marked point. If the receiver stays fixed but the implement runs consistently to one side, inspect the implement profile and offsets before changing the correction service. For work on later dates, use the repeat-pass checklist.