Why is my GEODNET station tracking so few satellites?

Why is my GEODNET station tracking so few satellites?

If a GEODNET station shows only a few satellites, first check that you are looking at a current reading and whether the display counts all constellations or only one. A stale console display and a live receiver with poor reception need different fixes.

Start with the observation path

Check online time, power and the antenna connection against the model manual. A receiver indoors still needs its outdoor GNSS antenna connected to the correct input. Look from the antenna position for new scaffolding, foliage or an overhead obstruction. A nearby window is a poor substitute for an open-sky site.

Compare before replacing equipment

Record the station model, time, readings and any recent changes. Compare the pattern over time with the station’s own earlier performance. If reception stays poor in open sky, send the details and clear photos of the cable ends and installation to support. A satellite count alone does not diagnose the fault.

Read two periods side by side

Compare a normal operating interval with the affected interval in the station dashboard. Check whether the station remained online in both. An interval with no uploaded observations calls for a network and power check. If it kept reporting but observations worsened, photograph the antenna surroundings and look for a new obstruction, a loose mount or a disturbed cable. Record the time of any single change before comparing again.