Hivemapper Bee fleet rollout: how to run a one-vehicle trial

Hivemapper Bee fleet rollout: how to run a one-vehicle trial

Before fitting a Hivemapper Bee to every vehicle, try one unit on a normal working route. The trial should answer three questions: can the driver see clearly, does imagery reach the account, and who deals with a missed upload? A busy fleet can cover the same streets several times a day, so vehicle count alone tells you little about the value of its mapping.

Choose the vehicle and the account

Pick a representative van that returns to its usual parking place. Record its asset number, the Bee identifier and the person responsible for the device. Decide who can access fleet data and what happens to the unit when the vehicle is reassigned. The Beekeeper fleet guide explains how devices are attached to a fleet. Follow its instructions for your account type before handing the vehicle back.

Test a complete shift

Fit the camera facing forward and check its view with the van loaded as usual. At the end of the shift, confirm the unit has power long enough to upload at the depot if you selected WiFi Connect. Record how much work the driver and dispatcher actually had to do. Repeat with a relief driver. Once both can complete the handover and the data arrives reliably, you have a procedure to use on the next vehicle. For fitting details, see our Bee installation guide.