Installing a Hivemapper Bee yourself

Installing a Hivemapper Bee yourself

You can install the Hivemapper Bee using its supplied mount and power accessories. Assemble it and check the view while parked. The camera needs a clear view of the road, and the power lead must stay clear of the driver’s view, controls and airbag areas.

Pair the app before driving

Park, power the Bee with the supplied vehicle adapter and open Bee Maps. On iOS, accept the prompt to join the dashcam Wi-Fi network. On Android, start discovery from the app and allow the nearby-device permissions it requests. Pairing from the phone’s Wi-Fi list alone can leave the app waiting for the camera. If the Bee repeatedly restarts, test with the recommended adapter before adjusting camera settings.

Check exactly what the lens sees

Open Settings, select Bee, then Mount Check. Inspect Clarity and Tilt with the car parked on level ground. A mount can look straight from the driver’s seat while the lens points into the bonnet or catches reflections from the dashboard. Follow the Bee mount-angle walkthrough and tighten the bracket before moving the car.

Verify collection and upload separately

Take a short normal drive, then park before handling the phone. Check whether the Bee collected imagery and whether that imagery has uploaded. If imagery is present but waiting to transfer, follow the Bee upload guide. Repositioning the camera will not clear that queue. For a company or leased car, also check the installation and permission considerations before leaving the device fitted.