How to set the camera angle on a Hivemapper Bee

How to set the camera angle on a Hivemapper Bee

A secure mount is only half the installation. The Bee needs a clear, level view of the road. Use the app’s Mount Check while parked whenever you first fit the device, move it to another vehicle or adjust the mount.

Use the camera’s own view

Connect to the Bee in the Bee Maps app. Open Settings, choose Bee and select Mount Check. Follow the on-screen clarity and tilt prompts. Check the glass in front of the lens and make sure the mirror, dashboard or windscreen edge does not dominate the scene.

Check again after the first journey

A suction mount that looked correct on installation can shift. Park, repeat the view check and inspect how the power lead sits. If the view is good but trips are missing, check upload progress separately. Changing the angle will not clear an upload backlog.

Diagnose a poor preview

Use the official Mount Check with the vehicle parked on level ground. If Clarity is poor, inspect the glass directly in front of the lens and check the camera’s preview for reflections. If Tilt is poor, adjust the bracket in small increments and repeat the check. If moving the bracket changes nothing in the preview, confirm the app is connected to this vehicle’s Bee.

Repeat after moving the mount

Photograph the position for reference if the Bee moves between cars. Different windscreen angles can give the same bracket setting a different view. Repeat both checks in each vehicle. Once the preview looks right, use the trip and upload checks for any missing contribution.