Using RTKsub for drone photogrammetry

Using RTKsub for drone photogrammetry

RTKsub can improve the camera positions recorded by a compatible survey drone. Those positions help place a photogrammetric model in its coordinate system. Camera positions are one input: image overlap, exposure, camera geometry and independent checks still matter.

Before and during capture

Confirm the coordinate and height references required for the deliverable. Configure NTRIP before the flight and check the RTK status. Plan sufficient coverage of the surfaces you need to model. A perfectly geotagged photograph cannot show a facade that the camera never saw.

Validate the model separately

Use independent surveyed checkpoints and report horizontal and vertical differences. Keep them separate from points used to fit or adjust the model. If the whole model shows a consistent height offset, check the geoid and coordinate-system settings before changing the flight plan.

Keep control and checkpoints separate

Designate which surveyed targets the processing software may use for adjustment. Reserve other targets to test the result. Keep their IDs, coordinates and height reference with the flight record. After processing, inspect the residual at each withheld checkpoint. If all heights show a similar shift, review the vertical reference before blaming the correction stream. See the drone accuracy checks.