Checking the accuracy of an RTK drone survey

Checking the accuracy of an RTK drone survey

A drone using RTKsub can record precise image positions in favourable conditions. Whether the finished survey meets a centimetre-level requirement must be established on the ground. A percentage of images labelled FIX is useful flight information, not the final accuracy report.

Start with the deliverable

Define the horizontal and vertical tolerance, coordinate system and required height reference. Place independent checkpoints where they test the survey area, including its edges and changes in elevation. Measure them by a method appropriate to the job.

Compare the finished results

After processing, compare model coordinates with the checkpoints and retain the residuals. A consistent offset suggests a reference or height issue. Local distortion may point to image geometry, coverage or processing. Use these checks before quoting the accuracy of a map to a client.

Read the pattern in the residuals

Compare the horizontal and vertical differences separately at independent checkpoints. A similar vertical offset across the site suggests checking the height reference and geoid first. One large discrepancy suggests checking that target’s ID, mark and measurement. Keep the full checkpoint list with the report and compare results with the project’s acceptance criteria. For the flight setup, use the photogrammetry workflow.