Can a dish bracket hold a GEODNET antenna?

Can a dish bracket hold a GEODNET antenna?

An existing bracket can be useful if it is rigid, accepts the correct mount and puts the GNSS antenna in open sky. The fact that it once held a satellite dish tells you little about its suitability for a fixed reference station.

Check the view and the structure

Look from the proposed antenna position. A nearby dish, metal roof edge or wall can block signals or create reflections. Check whether the bracket and its fixings move or show corrosion. Ask the building owner or installer to assess the fixings and any roof penetration before reuse.

Plan for the cable as well

Measure the route to the sheltered receiver, including the entry into the building. Arrange strain relief so the coax does not pull on its connectors. Once installed, record the position and check the Console’s quality indicators over time. If the only available point moves in the wind, choose a different location.

Inspect the bracket as a fixed reference

Have the installer assess the condition of the pole, fasteners and attachment to the building. A dish that still receives television is weak evidence for the stability of a GNSS reference antenna. Check that the proposed mount can be plumb and gives the antenna a clear view beside the dish. Run the upright antenna check after fastening.