Checking that a GEODNET antenna is upright

Checking that a GEODNET antenna is upright

GEODNET recommends an upright antenna on a stable mount. Check the straight mast or mounting surface identified by the manufacturer. The curved top of a GNSS radome is a poor surface for a spirit level.

Check two directions

From a safely accessible position, use a level on the straight support in one direction and then at a right angle. Check that the bracket holds its setting once tightened. Inspect the cable for strain and photograph the completed mount for later comparison.

If the station is already operating

Inspect from a safe position first. If the mast has moved, note when you noticed it and review recent station data. Ask support about repositioning or re-registration before moving an active reference antenna. A level mast cannot compensate for trees or a wall blocking the sky.

Use two perpendicular checks

From a safely accessible position, have the installer check the mast with a level in two directions at right angles. A pole that looks vertical viewed from the street can lean towards the roof. Recheck after tightening the bracket and take photos showing the installation. Use the roof mounting guide if the roof pitch makes a vertical mast difficult.