Multipath occurs when a satellite signal reaches the antenna by more than one path. A reflection from glass, metal or a nearby wall can distort the measurement. A receiver can see plenty of satellites and still produce poorer observations.
Read the station history
GEODNET shows a multipath indicator in the station performance record. Compare several periods and note any change in the surroundings. A new metal canopy beside the antenna is a more useful clue than a single low reward. Internet upgrades cannot remove reflections.
Assess a better position
Look for clear sky and separation from reflecting surfaces. Photograph the current site and note the time of any authorised installation change so you can compare quality afterwards. Moving a fixed reference antenna changes its physical location, so check the project’s relocation procedure before doing so.
Look for a repeating local pattern
Document the antenna’s view toward nearby roofs, metal cladding and walls. Compare intervals of poorer station performance with the same physical surroundings before changing anything. A single bad interval cannot establish multipath. If a new reflective surface appeared, start with the building-work checklist and compare observations again after the obstruction is removed.