How RTKsub uses GEODNET base stations

How RTKsub uses GEODNET base stations

RTKsub gives compatible receivers access to GNSS corrections over the internet. The reference stations are part of GEODNET. Think of a surveyor at a building site: their rover still receives satellite signals directly, while its controller supplies the correction stream.

What the connection carries

The NTRIP client connects with the subscriber’s credentials. With the AUTO mountpoint it sends the approximate rover position in a GGA message. The service can then select a nearby reference station. The receiver combines its own satellite measurements with the received data to calculate a position.

Before taking it to the field

Check coverage at the site and confirm your controller allows a custom NTRIP connection. Try an open-sky point and look for fresh corrections and a fixed solution. If you are buying hardware to host a station instead, select a fixed base kit and assess the roof location separately.

Further reading: RTK for Land Surveying and GIS: Corrections via NTRIP · Network · RTK network coverage map.