What to check in a GEODNET base station kit

What to check in a GEODNET base station kit

Compare GEODNET host equipment as a complete installation. The receiver model matters, but so do the supplied antenna, cable length, power connection, network connection and the mount needed at your building. A Wi-Fi hotspot or stand-alone rover is a different product.

Check the specification against the site

Identify the exact kit and its antenna connector. Measure the cable run from the intended mount to the receiver. Check how the receiver will reach the internet and how outdoor connections will be protected. Review the current GEODNET support guidance before adding extra cable.

Check eligibility separately

Inspect your location in the Console and read the current project rules for the hardware and area. A more expensive receiver does not remove a blocked sky view or guarantee a token amount. If you are unsure about a proposed site, send FreshMiners the receiver model, cable length and an overview photo.

Check the kit against the installation

Lay the components out next to the actual kit listing. Identify the receiver, GNSS antenna, coax and power equipment before planning the mount. Measure the route to the indoor receiver, including the wall entry. A missing mounting accessory and a cable too short for the building are different purchasing issues. Use the cable length guidance before buying an extension.