How RTKsub delivers GEODNET corrections to a rover

How RTKsub delivers GEODNET corrections to a rover

A rover needs two inputs at the same time: its own satellite observations and reference information supplied over the correction connection. RTKsub uses NTRIP to carry that reference stream from the GEODNET network over the internet. The rover calculates the position.

Follow an AUTO connection

The NTRIP client supplies the login and requests the AUTO mountpoint. It also sends the approximate rover position in GGA messages. This lets the service choose a nearby reference. Receiving a data stream is separate from resolving a fixed RTK solution inside the rover.

What to inspect if the result is wrong

Check the selected stream, correction age, solution state and field coordinate settings. For heights, verify antenna height and the selected height model. Test on known control before sending points to a client. A token transaction is not part of the rover’s positioning calculation.

Find the missing link in the chain

Check the NTRIP client’s login, the selected mountpoint and its GGA position reporting. Then check whether fresh corrections reach the actual rover. A phone receiving bytes can still be disconnected from an external receiver. In open sky, inspect the rover’s solution state and measure a known point. Use the software compatibility guide when the client and rover are on different devices.