How a fixed GEODNET base station works

How a fixed GEODNET base station works

A GEODNET host keeps a reference antenna at a stable location where it observes navigation satellites over time. The receiver sends its observation data to the network through the host’s internet connection. It is the fixed position that makes the observations useful as a reference.

Follow the physical connections

On a MobileCM installation, the outdoor GNSS antenna connects by coax to the receiver. Power and network access are separate connections. The reference antenna needs open sky. The receiver and connectors need the protection specified for the model.

Follow the data after installation

Check the station record in the GEODNET Console. Look at whether it is online and whether its observations are usable. A rover elsewhere can obtain a correction stream through a service such as RTKsub. The host does not need to pair its receiver directly to each rover.

Further reading: How to Configure Internet for Your Station · Network · GEODNET Console Introduction · GEODNET Base Station (MobileCM Triple-Band).