First identify what the measurement is for. Clearance above a roof, height above a survey mark and ellipsoidal height are different quantities. Before entering a number anywhere, identify the reference point and unit requested by the specific workflow.
Measure to the documented point
For a survey record, identify the antenna reference point in the antenna drawing. Record the vertical difference from the defined mark to that point. A tape run diagonally to the side of a dome measures a slant distance. A photograph of the setup helps another person reproduce the measurement.
Keep a useful installation record
Note the antenna model, mounting point, units and whether the measurement is vertical or slant. For an ordinary GEODNET host installation, follow the model’s setup procedure. If a form asks for an unclear height, get the field definition from support. Do not enter building height as a station coordinate.
Write down both endpoints
Make a sketch showing the ground mark and the exact point on the antenna used for the measurement. Record whether the distance was vertical or sloping and include the units. A tape measurement to the edge of a dome is ambiguous without the antenna model and reference point. If the required reference is unclear, consult the model manual before entering a height.