Aethir Edge setup and connection requirements

Aethir Edge setup and connection requirements

Aethir Edge is a dedicated device for contributing computing capacity to the Aethir network. Before activating it, check whether the project supports your location and what it currently requires for your account, wallet and rewards.

Prepare the installation

Use the supplied power equipment, choose a ventilated position and test broadband at that location. Aethir specifies 20 Mbps for both upload and download. The maximum wattage printed on the adapter is a supply rating. Use a plug-in meter if you want the energy cost of your installation.

Register and verify the unit

Use the official Edge onboarding guide and app for your particular unit. Follow the account and binding steps there, keep recovery information private and check that the app shows the correct device online. Any token-related conditions are set by the project and can change independently of the hardware.

What is in the box

According to the official user manual, the box contains:

The Aethir Edge device

A power adapter

A network cable for wired connection

Some resellers also list a setup guide, but that is not in the official manual, so do not count on it. The manual notes that the USB port has no practical use, so there is nothing to plug in there.

Run a useful first connection test

Place the Edge where it can stay ventilated and connect it by Ethernet for the first test. Measure both upload and download on that same line during the hours it will normally operate. A fast download result alongside an upload below the stated requirement is a reason to investigate the line before binding the unit. Use the official onboarding guide to identify the expected registration steps.

Diagnose an offline device

If the app shows a different identifier, resolve the account or binding issue first. If the correct device was online and disappeared, note the time and check power, router connection and internet service in that order. For a machine that stays online but costs more than expected to operate, use the home connection and electricity check with measured consumption.